"The gem cannot be polished without friction, nor man perfected without trials." Chinese proverb
Publication of research results is the primary means of disseminating new information within the research community. The list of PCRL publications is subdivided into:
Powertrain System Modeling:
Moskwa, J.J., Hedrick, J.K., "Modeling and Validation of Automotive Engines for Control Algorithm Development," ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 114, No. 2, pp. 278-285, June 1992.
Moskwa, J.J., "Estimation of Dynamic Fuel Parameters in Automotive Engines," ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 116/5, December, 1994.
Pan, C.H.,Moskwa, J.J., "An Analysis of the Effects of Torque, Engine Geometry and Speed on Choosing an Engine Inertia Model to Minimize Prediction Errors," ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 118, March 1996.
Kao, M.H., Moskwa, J.J., "Turbocharged Diesel Engine Modeling for Nonlinear Engine Control and State Estimation," ASME Journal of Dynamic Systems, Measurement, and Control, Vol 117, March 1995.
Pan, C.H., Shiao, Y.J., Moskwa, J.J., "Advanced Dynamic S.I. Engine Modeling for Diagnostics and Control," International Journal of Vehicle Design, Vol. 15, No. 6, 1994.
Weeks, R.W., Moskwa, J.J., "Automotive Engine Modeling for Real-Time Control Using MATLAB/SIMULINK," SAE paper #950417, February 1995, also published in SAE special publication SP-1080.
Pan, C.H., Moskwa, J.J., "Dynamic Modeling and Simulation of the Ford AOD Automatic Transmission," SAE paper #950899, February 1995.
Rubin, Z.J., Moskwa, J.J., Munns, S.A., "Development of the Automotive Research Center (ARC) Powertrain System Dynamic Models," Proceedings of the ASME-ICE Spring Technical Conference, Vol. 28-1, April 1997, Ft. Collins, CO.
Moskwa, J.J., Munns, S.A., Rubin, Z.J. "The Development of Vehicular Powertrain System Modeling Methodologies; Philosophy and Implementation," SAE paper #971089, February 1997, Detroit, MI.
Anthony, J.J., Moskwa, J.J., Danielson, E., "Powertrain Simulation of the M1A1 Abrams using Modular Model Component," SAE paper #980926.
Hribernik, A., Moskwa, J.J., "Transient Response of a Cross-Flow Charge Air Intercooler and its Influence on Engine Operation," Proceedings of the ASME-ICE Spring Technical Conference, April 1998, Ft. Lauderdale, FL.
Moskwa, J.J., Hedrick, J.K., "Automotive Engine Modeling for Real Time Control Application," Proceedings of the 1987 American Control Conference, WA10-11:00, pp. 341-346, Minneapolis, MN, June 1987.
Liaw, C.M., Moskwa, J.J., "A Simple Method for the Calculation of Cylinder Pressure in Diesel Engine Cycle Simulation," University of Wisconsin-Madison, Department of Mechanical Engineering Report #ECD-89-01, 1989.
Kao, M.H., Moskwa, J.J., "Modeling and Simulation of the Turbocharger," University of Wisconsin-Madison, Department of Mechanical Engineering Report #ECD-89-02, 1989.
Sirisuwannatash, W., Moskwa, J.J., "Combustion Modeling for Diesel Engine Diagnostics," University of Wisconsin-Madison, Department of Mechanical Engineering Report #ECD-90-01, 1990.
Nonlinear Engine Diagnostics:
Shiao, Y.J., Moskwa, J.J., "Misfire Detection and Cylinder Pressure Reconstruction for SI Engines," SAE paper #940144, February 1994, also in an SAE special publication Electronic Engine Controls (SP-1029).
Kao, M.H., Moskwa, J.J., "Nonlinear Cylinder and Intake Manifold Pressure Observers for Engine Control and Diagnostics," SAE paper #940375, February 1994, also published in an SAE special publication Electronic Engine Controls (SP-1029).
Weeks, R.W., Moskwa, J.J., "Transient Air Flow Rate Estimation in a Natural Gas Engine Using a Nonlinear Observer," SAE paper #940759, February, 1994.
Kao, M.H., Moskwa, J.J., "Engine Load and Equivalence Ratio Estimation for Control and Diagnostics via Nonlinear Sliding Observers," International Journal of Vehicle Design, Vol. 15, No. 3/4, 1994.
Shiao, Y.J., Moskwa, J.J., "Cylinder Pressure and Combustion Heat Release Estimation for SI Engine Diagnostics Using Nonlinear Sliding Observers," IEEE Transactions on Control Systems Technology, Vol. 3, No. 1, March 1995.
Kao, M.H., Moskwa, J.J., "Model-Based Engine Fault Detection Using Cylinder Pressure Estimates from Nonlinear Observers," Proceedings of the 33rd IEEE Conference on Decision and Control, December, 1994, Orlando, FL.
Kao, M.H., Moskwa, J.J., "Nonlinear Diesel Engine Control and Cylinder Pressure Observation," ASME Journal of Dynamic Systems Measurement and Control, Vol. 117, No. 2, June 1995.
Shiao, Y.J., Moskwa, J.J., "Fault Identification in Engine Misfire Using a Runner-by-Runner Intake Manifold Observer," SAE paper #960327, February 1996.
Moskwa, J.J., Pan, C.H., "Engine Load Torque Estimation Using Nonlinear Observers, " Proceedings of the 34th IEEE Conference on Decision and Control, December 13-15, 1995, New Orleans, LA
Chen, S.X., Moskwa, J.J., "Application of Nonlinear Sliding Mode Observers for Cylinder Pressure Reconstruction," IFAC International Journal of Control Engineering Practice, Issue 5(8), August, 1997. Proceedings of the 13th International Federation of Automatic Control (IFAC) World Congress, July 1996, San Francisco, CA.
Shiao, Y., Moskwa, J.J., "Model-Based Cylinder-by-Cylinder Air-Fuel Ratio Control for SI Engines Using Sliding Observers," Proceedings of the IEEE Conference on Control Applications, September, 1996, Dearborn, MI.
Lewandowski, E.J., Moskwa, J.J., "On Guaranteeing Global Stability for Sliding Mode Control, Theory and Experiment," Proceedings of the 1991 American Control Conference, TP14-17;00, pp. 2077-2082, June 1991, Boston.
Kao, M.H., Moskwa, J.J., "Estimating the Indicated Torque from the Engine Speed Measurement," University of Wisconsin-Madison, Department of Mechanical Engineering . Report #ECD-90-02, 1990.
Moskwa, J.J., Wang, W., Bucheger, D.J., "A New Methodology for Engine Diagnostics and Control Utilizing "Synthetic" Engine Variables: Theoretical and Experimental Results," Proceedings of ASME-IMECE, November 1998, San Diego, CA.
Powertrain Control:
Moskwa, J.J., Hedrick, J.K., "Nonlinear Algorithms for Automotive Engine Control," IEEE Control Systems Magazine, Vol. 10, No. 3, pp.88-93, April 1990.
Moskwa, J.J., "Sliding Mode Control of Automotive Engines," ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 115, No. 4, pp. 687-693, December 1993.
Yu, S-H., Moskwa, J.J., "A Global Approach to Vehicle Control: Coordination of Four Wheel Steering and Wheel Torques," ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 116, No. 4, December 1994.
Kao, M.H., Moskwa, J.J., "Nonlinear Diesel Engine Control and Cylinder Pressure Observation," ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 117/1, June 1995.
Moskwa, J.J., Anthony, J.W., Babbitt, G.B. and Rubin, Z.J., "Synthesis of Software and Hardware in PCRL for Powertrain Design and Development," IEEE Control Systems Magazine, Special Issue on Powertrain Control, 1998.
Moskwa, J.J., Scarisbrick, A.D., Eade, D., "Design Robustness System (DRS); New Concepts for Robustness Analysis," Proceedings of ASME-IMECE, November 1998, San Diego, CA.
Related Powertrain Topics::
Gutknecht, M.J., Schneidewend, D.R., Moskwa, J.J., Kime, C.R., Ramanathan, P., "Fault Tolerant Analysis of Alternate Automotive Brake System Designs," SAE paper #930511 and 1993 SAE Transactions, February, 1993.
Longstreth, J.C., Sanders, F.A., Seaney, S.P., Moskwa, J.J., Fronczak, F.J., "Design and Construction of a High-Bandwidth Hydrostatic Dynamometer," SAE paper #930259 and 1993 SAE Transactions, February, 1993.
Shiao, Y.J., Moskwa, J.J., "An Investigation of Load Force and Dynamic Error Magnitude Using the Lumped Mass Connecting Rod Model," SAE paper #930617 and 1993 SAE Transactions, February, 1993.
Moskwa, J.J., Babbitt, G.R., Seaney, S.P., "Development of a High-Bandwidth, Hydrostatic Transient Engine Dynamometer System," Proceedings of the 29th ISATA Conference, June 3-6, 1996, Florence, Italy.
Babbitt, G.R., Moskwa, J.J., "Hardware Implementation Details and Test Results for a High-Bandwidth, Hydrostatic Transient Engine Dynamometer System," SAE paper #970025 and Special Publication SP-1240, February 1997, Detroit, MI.
Babbitt, G.R., Moskwa, J.J., "Design of an Integrated System for the Control and Data Acquisition of a High-Bandwidth, Hydrostatic Transient Engine Dynamometer System," Proceedings of the 1997 American Control Conference, June 1997, Albrquerque, NM.
Moskwa, J.J., Barber, P., Banbury, M., Castello, S., Heldke, B. "The University of Wisconsin-Madison Paradigm Hybrid Electric Vehicle," SAE special publication SP-980, 1994 SAE International Congress and Exposition, Detroit, MI, February 1994.
Wong, J.Y., Moskwa, J.J., Velinsky, S.A. (coeditors), Transportation Systems 1990, AMD-Vol. 108, ASME, 1990.
Moskwa, J.J., "Vehicle Powertrain Research Needs for the 1990's," Advanced Automotive Technologies 1991, DE-Vol. 40, pp. 17-20, ASME Winter Annual Meeting, Atlanta, December 1991.
Copyright © 1998-2008,
Powertrain Control Research Laboratory. All rights reserved.
URL: http://powertrain.engr.wisc.edu